For ad rates, send email to: advertising@CleanCombustion.com
For Clean
Combustion; Advertising, Business Development, Austin, Texas advertising@CleanCombustion.com
For Clean
Combustion emissions engineering
Austin, Texas engineering@CleanCombustion.com |
Clean Combustion
www.CleanCombustion.com
"The
'Holy Grail' for Energy is 'Net
Zero Energy'
which is
'Way
Beyond Solar!'" sm
What
is Clean Combustion?
Clean Combustion includes fuels and technologies that do not require emissions abatement such as Selective Catalytic Reduction, scrubbers or other equipment needed to reduce hazardous air pollutants. In addition to reducing/eliminating hazardous air pollutants, the EPA is now requiring certain companies and industries to begin reducing their greenhouse gas emissions.
Running on "green fuel" such as Biomethane,
B100 Biodiesel,
Synthesis Gas
or natural gas, our CHP
Systems are the greenest "clean
power generation" systems available.
With Natural Gas at approximately $3.00/mmbtu, our Clean Power CHP Systems generate power for about $0.03 / kWh (fuel cost).
With operations & maintenance added, that's about 4.5 cents /kWh - or approximately 50% - 60% less than what most commercial customers are paying, on average, for their electricity.
CHP Systems (Cogeneration
and Trigeneration)
Plants
Have Very High Efficiencies, Low Fuel Costs & Low Emissions
The CHP System
below is rated at 900 kW with a
heat rate of 4100 btu/kW & system efficiency of 92%.
The
CHP System
below features: (2) Natural Gas Engines @ 450 kW each
on one skid with optional Selective
Catalytic Reduction system
which removes Nitrogen
Oxides to "non-detect."
A
CHP System
may be the best solution for your company's economic and environmental
sustainability as we "upgrade" natural gas to clean power with our clean
power generation solutions. CHP
Systems and Dispersed
Generation power plants are an ideal solution for
data centers, district energy systems electric utilities, electric co-ops, electrical sub-stations,
energy service companies, food processing plants, hospitals, military bases
and universities among many others.
High-efficiency CHP Systems eliminate blackouts, electric grid supply problems and significantly reduce greenhouse gas emissions and hazardous air pollutants associated with electric power generation at central power plants. Our emissions abatement solutions reduce nitrogen oxides (NOx) to "non-detect" and can be installed and operated in most EPA non-attainment regions!
What
is "Cogeneration"?
Did you know that 10% of our nation's electricity now comes from "cogeneration" plants?
And
because cogeneration
is so efficient, it saves its customers up to 40% on their energy expenses, and
provides even greater savings to our environment through significant reductions
in fuel usage and much lower greenhouse
gas emissions.
Cogeneration
- also known as “combined
heat and power” (CHP), cogen, district energy, total energy, and
combined cycle, is the simultaneous production of heat (usually in the form of
hot water and/or steam) and power, utilizing one primary fuel such as natural
gas, or a renewable fuel, such as Biomethane,
B100 Biodiesel,
or Synthesis Gas.
Cogeneration technology is not the latest industry buzz-word being touted as the solution to our nation's energy woes. Cogeneration is a proven technology that has been around for over 120 years!
Our nation's first commercial power plant was a cogeneration plant that was designed and built by Thomas Edison in 1882 in New York. Our nation's first commercial power plant was called the "Pearl Street Station."
What
is "Trigeneration"?
Trigeneration is the simultaneous production of three forms of energy - typically, Cooling, Heating and Power - from only one fuel input. Put another way, our trigeneration power plants produce three different types of energy for the price of one.
Trigeneration energy systems can reach overall system efficiencies of 86% to 93%. Typical "central" power plants, that do not need the heat generated from the combustion and power generation process, are only about 33% efficient.
Trigeneration
Diagram & Description
Trigeneration Power Plants' Have the Highest System Efficiencies and are
About 300 % More Efficient than Typical Central Power Plants
Trigeneration
plants are installed at locations that can benefit from all three forms of
energy. These types of installations that install trigeneration
energy systems are called "onsite power generation" also referred to as
"decentralized energy."
One of our company's principal's first experience with the design and development of a trigeneration power plant was the trigeneration power plant installation at Rice University in 1987 where our trigeneration development team started out by conducting a "cogeneration" feasibility study. The EPC contractor that Rice University selected installed the trigeneration power which included a 4.0 MW Ruston gas turbine power plant, along with waste heat recovery boilers and Absorption Chillers. A "waste heat recovery boiler" captures the heat from the exhaust of the gas turbine. From there, the recovered energy was converted to chilled water - originally from (3) Hitachi Absorption Chillers - 2 were rated at 1,000 tons each, and the third Hitachi Absorption Chiller was rated at 1,500 tons. The Hitachi Absorption Chillers were replaced shortly after their installation by the EPC company. The first trigeneration plant at Rice University was so successful, they added a second 5.0 MW trigeneration plant so today, Rice University is now generating about 9.0 MW of electricity, and also producing the cooling and heating the university needs from the trigeneration plant and circulating the trigeneration energy around its campus.
Trigeneration
Chart
Trigeneration's
"Super-Efficiency" compared
with other competing technologies
As you can see, there is No Competition for Trigeneration!
Our trigeneration power plants are the ideal onsite power
and energy solution for customers that include: Data
Centers, Hospitals, Universities, Airports, Central Plants, Colleges
& Universities, Dairies, Server Farms, District Heating & Cooling
Plants,
Food Processing Plants, Golf/Country
Clubs, Government Buildings, Grocery Stores, Hotels, Manufacturing
Plants,
Nursing Homes, Office
Buildings / Campuses,
Radio Stations, Refrigerated
Warehouses,
Resorts,
Restaurants,
Schools, Server Farms, Shopping Centers, Supermarkets, Television
Stations, Theatres and Military Bases.
At about 86% to 93% net system efficiency, our trigeneration power plants are about 300% more efficient at providing energy than your current electric utility. That's because the typical electric utility's power plants are only about 33% efficient - they waste 2/3 of the fuel in generating electricity in the enormous amount of waste heat energy that they exhaust through their smokestacks.
Trigeneration is defined as the simultaneous production of three energies: Cooling, Heating and Power. Our trigeneration energy systems use the same amount of fuel in producing three energies that would normally only produce just one type of energy. This means our customers that have our trigeneration power plants have significantly lower energy expenses, and a lower carbon footprint.
"Changing the Way the World Makes and Uses Energy" SM
Austin, Texas
marketing@CleanCombustion.com
Carbon Emissions * CHP Systems * Clean Coal Technology * Coal to Gas * Coal to Natural Gas Dry Sorbent Injection * EcoGeneration * Emissions Abatement * Emissions Engineering FuelSwitching * Greenhouse Gas Emissions * Greenhouse Gas Reporting Hazardous Air Pollutants
* Net
Zero Energy
* New
Source Review
* Trigeneration
|
CHP Systems * Clean Power Generation * Emissions Abatement * OxyCombustion
Pollution Free Power * Solar Cogeneration * Trigeneration
Follow
us on Twitter:
#CleanCombust
Clean Combustion
www.CleanCombustion.com
marketing@CleanCombustion.com
CleanCombustion.com
Copyright
© 2003
All Rights Reserved